The Macsa iCon CO2 laser is an affordable laser with top specifications.
This laser is the latest new development of Macsa which is building lasers for more than 25 years.
The iCON is not only reliable but also the repair and maintenance costs are minimal. And a laser does not consume ink.
The iCON is very user frienly and with the compact dimensions easy to install in difficult locations.
The laser can code on both moving and stationnary products.
A 14 cm wide colour Touch Screen is integrated in the front of the laser.
As an option an external Touch Screen can be connected.
The iCONnet version can also be connected with a PC and the Marca Lite software can be used to create marking files.
At any time the 3 LED lights at the front show the status of the laser.
The ventilator is at the back of the laser. Here you also find the connections for the main supply, photocell, shaft encoder, the remote I/O and the external controller.
The innovative filters are placed on both sides. These are easy to clean/replace.
With these filters the laser will also operate in the most difficult environtments.
In the modern design housing all the important components are installed: laser, mirrors, supply, electronics an micoprocessors..
The Macsa iCON CO2 laser has the following technical specifications:
· Power : 10 or 30 Watt
· Wave length : 10,6 µm
· Interface : Ethernet (TCP/IP) for the iCONnet version
· Main supply : 115/230 V, 50/60 Hz, 1 fase + N
· Dimensions : 10 Watt: 632,5 x 126,15 x 183 mm (L x H x W)
30 Watt: 725 x 183,5 x 237 mm (L x H x W)
· Weight : 10 Watt: 10 kg
30 Watt: 22 kg
· Working distance : 95 mm
· Focal distance : 100 mm
· Marking window : 35 x 35 mm
· Number of text lines : 4
· Beam diameter : 360 µm
· Power density : 10 Watt: 121 W/mm²
30 Watt: 393 W/mm²
· Software : Scanilux V4.5 and higher
· Working temperature : between 10 and 40 °C
· Humidity : < 95 %, non-condensing
· Installation : no vibrations
